Riello Aaria Mono Plus AMK P Series, User Instructions

Page: 19 / 28

19
USE
Set required time as follows:
— work on
— Each time the key is pressed, the values changes by 1. by
keeping the key pressed down, the value changes faster.
— confirm with
The symbol ends intermittently.
•
Switch-off
—
press in sequence until all the indications relative to
the time programming have disappeared
9
The set time is memorized by the remote control and ap-
pears every time is pressed.
9
Programming remains active even when remote control is
off.
9
Hourly programming has higher priority over the Night func-
tion. If Automatic switch-off is active, the unit turns off even
though the Night function is still active.
Selecting the temperature measurement unit
If required, it is possible to change the temperature measure-
ment unit.
The available units are:
— Celsius °C
— Fahrenheit °F
Select required unit as follows:
— work on
— Each press will select a different unit, toggling between °C
and °F.
Setting the transmission code
If two indoor units are installed close to one another and user
wishes to control them separately, two different transmission
channels can be set.
For communication to succeed, the selected communication
channel on indoor unit and remote control must be the same.
Available transmission channels are:
Factory set channel is A.
Select required channel as follows:
— work on
Each press will select a different channel, toggling between A
and b.
9
The unit will not operate if the transmission channel settings
in indoor unit and remote control are not the same.
9
To change transmission channel on indoor unit, contact the
Technical Support Service.
Button locking
Prevent any accidental control by locking remote control but-
tons.
• button locking
— press + simultaneously
Remote control display shows .
• button unlocking
— press + simultaneously
disappears in the display of the remote control
2.5
Emergency switch
The emergency switch allows equipment switch-on and off in
an emergency (faulty remote control, flat batteries).
Switch-on occurs with preset settings according to detected
ambient temperature:
Ambient temperature above 24 °C
— Cooling mode
— Temperature setting 24 °C
— Ventilation speed Auto
— Hourly programming off
Ambient temperature below 24 °C
— Heating Mode
— Temperature setting 24 °C
— Ventilation speed Auto
— Hourly programming off
9
Presets cannot be changed.