background image

4

GENERAl INfoRMATIoN

1

 

GENERAL INFORMATION

1.1

 

General Notices

When you get the product, check immediately that the con-
tents are all present and undamaged. Contact the dealer 

R

 if you notice any problems.

The product' s installation must be carried out by an au-
thorised company that will issue a declaration of the instal-
lation's conformity to the product's owner once the work 
has been completed, indicating that the work has been car-
ried out in accordance with the standards of good practice, 
current National and Local regulations, and the indications 
provided by 

R

 in the instruction booklet accompanying 

the device.

The product must be used for its intended purpose, as stat-
ed by 

R

 for which it has been expressly manufactured. 

R

 shall bear no responsibility, whether of a contractual 

or non-contractual nature, for any damage caused to peo-
ple, animals, or property due to incorrect installation, ad-
justments, or maintenance, or improper use.

During storms, set the main switch to “Off”.

Avoid leaving the room closed for a long time. Periodically 
open windows to ensure proper ventilation.

Too low a temperature is harmful for your health and is a 
waste of energy. Avoid direct contact with the air flow for a 
long time.

Keep nearby area clean and tidy and avoid obstructing air 
in and out flows.

Comply with the legislation in force on the country of de-
ployment with regard to the use and disposal of packaging, 
of cleaning and maintenance products and for the man-
agement of the unit's decommissioning.

Any repair and maintenance interventions must be carried 
out by 

R

 Technical Support Service, in accordance with 

the provisions contained in this publication. Do not modify 
or tamper with the unit as dangerous situations may arise 
and the unit manufacturer will not be liable for any damage 
caused.

In the event of any functional anomalies or fluid leaks, set 
the system's main switch to its "off" position. Promptly con-
tact your local 

R

 Technical Support Service, and do not 

perform any interventions upon the device on your own.

Any gas leaks indoors can generate toxic gases if they come 
into contact with naked flames or high temperature bodies, 
in case of leaks, please air the rooms thoroughly.

Do not place any inflammable object (spray cans) within a 1 
metre radius from the air expulsion.

According to EU Regulation no. 517/2014 regarding certain 
fluorinated greenhouse gases, the total amount of refrig-
erant contained within the installed system must be indi-
cated. This information can be found on the unit technical 
data plate.

This unit contains fluorinated greenhouse gases covered 
by the Kyoto protocol. Maintenance and disposal activities 
must be carried out exclusively by skilled personnel.

R32 refrigerant gas is slightly flammable and odourless.

If the unit must be moved, contact the  

R

 Technical 

Support Service.

This booklet is an integral part of the device, and must 
therefore be carefully preserved, and must ALWAYS accom-
pany it, even in the event that it is sold to another Owner 
or User, or is transferred to another system. If it is damaged 
or lost, another copy can be requested to 

R

 Technical 

Support Service in your Area.

1.2

  Safety precautions

It should be noted that the use of products that utilize elec-
tric energy requires certain essential safety regulations to be re-
spected, including the following:

 

0

Do not allow children or unassisted disabled people to use 
the unit.

 

0

Do not touch the unit while barefoot and/or partially wet.

 

0

Do not spray or throw water directly on the unit.

 

0

It is forbidden to place weights on the device.

 

0

It is strictly forbidden to touch the coil fins, the moving parts, 
to place any body parts between them, or to insert pointy 
objects into the grilles.

 

0

It is forbidden to perform any technical interventions or 
cleaning operations before having disconnected the de-
vice from its electrical power supply, by setting the system's 
main switch to its "OFF" position.

 

0

It is forbidden to modify the safety or regulation devices 
without the authorisation of the manufacturer.

 

0

Do not pull, detach or twist the electrical wires coming out 
of the unit, even when the unit is disconnected from the 
power grid.

 

0

The packing material must not be disposed of in the sur-
rounding environment and must be kept out of children 
reach, as it can be dangerous. It must be disposed of ac-
cording to the regulations in force.

1.3

  Energy saving tips

Cover the windows with a shutter or a curtain to block the 
entrance of sunlight, increasing the cooling effect.

Maintaining the temperature setting at a moderate level 
helps save energy.

Recommended temperature settings:

 

for cooling: 26-28 °C

 

for heating: 20-24 °C

Summary of Contents for Aaria Mono Plus AMK P Series





























Reviews: