Riello 20120391, Instructions For The Installer And For The Technical Support Service

Page: 176 / 188

176
OVERVIEW OF THE PARAMETERS
INSTALLATION
MODE MENU – MODES
Point name Status Units Text displayed* Description
1 m_delay no/yes - Active Delay
Active delay (during mode switch-
ing)
2 m_2ndspt no/yes - Second Setpoint Active
Second Setpoint Active (in unoccu-
pied periods)
3 m_reset no/yes - Active Reset The reset is active
4 m_limit no/yes - Active Demand Limit Active demand limit
5 m_ramp no/yes - Active Ramp Charging Active ramp charging
6 m_cooler no/yes - Active Heater Cooler Active water exchanger heater
7 m_pmprot no/yes - Active Pump Rotation Active pump rotation
8 m_pmpper no/yes - Per Pump Active Periodical pump start-up active
9 m_night no/yes - Low Night Noise Active Low night noise mode active
10 m_SM no/yes - Active System Manager Active System Manager
11 m_leadla no/yes - Active Master/Slave Master/Slave enabled
12 m_auto no/yes - Active Auto-switching Active auto-switching
13 m_heater no/yes - Active Electric Heater Active electric heating
14 m_lo_ewt no/yes - Low Heating EWT Lockout Low heating EWT lockout
15 m_boiler no/yes - Boiler Active Boiler active
16 m_ice no/yes - Active Ice Mode Active ice mode
17 m_defr_a no/yes - Active Defrost on Cir A Active defrost on circuit A
18 m_defr_b no/yes - Active Defrost on Cir B Active defrost on circuit B
19 m_sst_a no/yes - Circuit A Low Suction Circuit A low suction temperature
20 m_sst_b no/yes - Circuit B Low Suction Circuit B low suction temperature
21 m_dgt_a no/yes - Circuit A High DGT
Circuit A high discharge gas tem-
perature
22 m_dgt_b no/yes - Circuit B High DGT
Circuit B high discharge gas tem-
perature
23 m_hp_a no/yes - Cir A High Pressure Bypass High pressure bypass on circuit A
24 m_hp_b no/yes - Cir B High Pressure Bypass High pressure bypass on circuit B
25 m_sh_a no/yes - Circuit A low overheating Circuit A low overheating
26 m_sh_b no/yes - Circuit B low overheating Circuit B low overheating
* It depends on the selected language (English by default).