Ricoma Quick Start Guide
31
Figure 63
Figure 65
Figure 64
4. Your machine will now display a list of all the files in your
USB’s memory.
5. Select the file you wish to input, and select the “Input” key
on the screen. See Figure 64.
6. Then, click on the machine’s memory icon located to the
left of the USB’s memory icon. See Figure 65.
7. The design you just recently saved should now appear first
on the list of the machine’s saved designs.
8. Next, click on the design you wish to embroider, and click
the “select” key.
9. The machine will ask if you would like to embroider the
current design. Select “yes.”
10. The design should now appear on the main menu of the
machine’s panel. You’re now ready to center and trace your
design for embroidery!
HOW TO EXPORT A DESIGN
In some cases, you may want to export a design that you have saved on your machine’s memory into
your USB in case you no longer have it saved on your computer or have switched computers. Follow
these steps to export your design.
1. With embroidery mode unlocked, select the Design key to enter the USB/embroidery
machine’s memory interface.
2. Select the embroidery machine’s memory, making sure the embroidery machine icon is
highlighted blue.
3. Select the design you wish to export from the list of designs in the machine’s memory.
