Ricoma Quick Start Guide
27
Hooping the back of the cap using a round hoop
1. Take hoop A or B.
2. Find a surface that is the width of the bottom ring of the hoop you have chosen. The
corner of a table would work.
3. Place the bottom ring on that surface.
4. Place your backing on top of the bottom ring. It would be helpful to use adhesive spray on
the backing or adhesive backing.
5. Place the cap on top of the bottom ring and backing.
6. Smooth out the material, eliminating any wrinkles.
7. Place the top ring over the fabric, and align it with the bottom ring.
8. Join the top and bottom ring, as you would with flats.
CONTROL PANEL OVERVIEW
MANUAL COLOR CHANGE
START-UP
EMB MODE MENU
This key displays the current needle setting and is used to command your machine to
move to a certain needle.
This key is used to set the color-change mode. You can set the mode to
automatic, semi-automatic or manual.
This key is used to fast-forward or rewind through your embroidery designs.
PARAMETERS
Used to adjust the machine parameters. We do not recommend changing
any settings without the help of a certified Ricoma technician.
DESIGN
This key is used to select, display, delete, copy, divide, combine, edit and
group designs in the machine’s memory.
