Ricoh SP 4510 DN, User Manual

Page: 92 / 144

Message Cause Solution
"Address Book is currently in
use by another function.
Authentication has failed." The printer currently cannot
perform authentication because
the Address Book is being used
by another function. Wait a while, and then retry the
operation.
"Auto-registration of user
information has failed." Automatic registration of
information for LDAP
Authentication or Windows
Authentication failed because
the Address Book is full. For details about automatic
registration of user information,
see Security Guide.
"Classification Code is
incorrect." The classification code has not
been entered, or the
classification code has been
entered incorrectly. Enter the correct classification
code.
"Classification Code is
incorrect." The classification code is not
supported by the printer driver. Select [Optional] for the
classification code. For details
about how to specify
classification code settings, see
"Registering Classification
Codes", Operating Instructions.
"Collate has been cancelled." Collate was canceled. Decrease the number of files
sent to the printer or install the
optional SDRAM module. For
details about installing SDRAM
module, contact your service
representative.
"Command Error" An RPCS command error
occurred. Check that the communication
between a device and the
printer is working correctly.
"Compressed Data Error." The printer detected corrupt
compressed data. • Check the connection
between the computer and
the printer.
• Check that the program
you used to compress the
data is functioning
correctly.
3. Troubleshooting
90