manualshive.com logo in svg

Ricoh SP 202 SN, Operating Instructions Manual

Share
Download
Ricoh SP 202 SN Operating Instructions Manual Download Page 155

3. Select Device area

Displays the name of the selected model.

4. Message area

Displays the status of this machine with a message.
For details about error messages, see page 187 "Error and Status Messages Appear on the Smart
Organizing Monitor".

Configuring the Machine Settings

Smart Organizing Monitor is used to modify the machine’s settings.

1.

On the [Start] menu, click [All Programs].

2.

Click [Smart Organizing Monitor for SP xxx Series].

3.

Click [Smart Organizing Monitor for SP xxx Series Status].

4.

If the machine you are using is not selected, click [Select Device...], and then select the
machine's model.

5.

Click [OK].

6.

On the [User Tool] tab, click [Printer Configuration].

7.

Change the settings if necessary.

8.

Click [OK].

9.

Click [Close].

Tab Settings

This section provides a tab-by-tab overview of the machine settings that can be modified using Smart
Organizing Monitor. For more information on each setting item, see the Smart Organizing Monitor
Help.

System tab

• Register custom paper sizes.
• Adjust the printing position or density to improve the printing quality when printed results are

not satisfactory.

• Enable or disable Energy Saver Mode, and specify the amount of time that will elapse before

switching to it.

• Update the machine firmware.

Fax tab

• Specify the fax name and number of the machine.
• Register, edit, and delete speed dial entries.

Using Smart Organizing Monitor

153

Summary of Contents for SP 202 SN

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands