manualshive.com logo in svg

Ricoh SP 202 SN, Operating Instructions Manual

Share
Download
Ricoh SP 202 SN Operating Instructions Manual Download Page 129

Set Time

Sets the time of the machine’s internal clock.

• Time format: 12-hour Format, 24-hour Format
• AM/PM stamp: AM, PM (for 12-hour Format)
• Hour: 0 to 23 (for 24-hour Format), or 1 to 12 (for 12-hour Format)
• Minute: 0 to 59

Program Fax Info.

Specifies the user information for sending a fax.

• Own Fax Number

Specifies the fax number of the machine using up to 20 characters, including 0 to 9, space,
and "+".

• Own Name

Specifies the name of the machine using up to 20 characters.

Function Priority

Specifies the mode that is activated when the power is turned on.
Default: [Copier]

• Copier
• Facsimile
• Scanner

Energy Saver Mode

Sets the machine to enter Energy Saver Mode, Energy Saver Mode 1 or Energy Saver Mode 2, to
reduce power consumption. The machine recovers from Energy Saver Mode when it receives a
print job, prints a received fax, receives TWAIN scan directions from the computer, or when any
key is pressed.

Energy Saver Mode 1

The machine enters Energy Saver Mode 1 if the machine has been idle for about 30 seconds.
It takes less time to recover from Energy Saver Mode 1 than from power-off state or Energy
Saver Mode 2, but power consumption is higher in Energy Saver Mode 1 than in Energy
Saver Mode 2.
Default: [Off]

• Off
• On

Energy Saver Mode 2

The machine enters Energy Saver Mode 2 after the period of time specified for this setting has
passed. The machine consumes less power in Energy Saver Mode 2 than in Energy Saver

System Settings

127

Summary of Contents for SP 202 SN

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands