manualshive.com logo in svg

Ricoh SP 202 SN, Operating Instructions Manual

Share
Download
Ricoh SP 202 SN Operating Instructions Manual Download Page 119

Number of Rings

Specifies how many times the external telephone or handset must rings before the machine
starts to receive a fax when [Switch RX Mode] is set to [Auto].
Default: 3 times

• 3 to 5 times, in increments of 1

If you have set [Country Code] to [Japan], you can specify it from 1 to 5 times. The default is
1 times.

Add Footer

Sets the machine to add a footer to every fax you receive.
Default: [On]

• Off
• On

Del. TX Standby File

Deletes unsent fax jobs remaining in the machine's memory.
This function is only performed when selected.

• Delete File

To delete a fax job, select the job you want to delete.

• Delete All Files

To delete all fax jobs.

Comm. Settings

ECM Transmission

Sets the machine to automatically resend parts of the data that are lost during transmission.
Default: [On]

• Off
• On

ECM Reception

Sets the machine to automatically receive parts of the data that are lost during reception.
Default: [On]

• Off
• On

Dial Tone Detect

Sets the machine to automatically detect a dial tone before dialing the destination.

• Detect
• Do not Detect

Fax Features Settings

117

Summary of Contents for SP 202 SN

















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands