Ricoh SP 200S Page 246 Operating Instructions Manual Download

Page: 246 / 357

Scanner Problems

Problem

Solution

The scanned image is dirty.

• The scanning part is dirty.
• Before placing originals on the exposure glass, make

sure that toner or correction fluid is dry.

The scanned image is distorted or
out of position.

The original was moved during scanning. Do not move the
original during scanning.

The scanned image is upside down.

The original was placed upside down. Place the original in the
correct orientation. See page 35 "Placing Originals".

The scanned image is blank.

The original was placed with the front and back reversed.

The scanned image is too dark or
too light.

Adjust the image density.

10. Troubleshooting

160

Summary of Contents for SP 200S






































































































































































































































































































































































Search results

Summary of Contents for SP 200S

Reviews:

Related manuals for SP 200S

Brands by name

Popular brands

Ricoh SP 200S, Operating Instructions Manual

Search results

Summary of Contents for SP 200S

Reviews:

Related manuals for SP 200S

Brands by name

Popular brands