Ricoh SP 200S, Operating Instructions Manual

Page: 199 / 357

• Minute: 0 to 59
Program Fax Info.
Specifies the user information for sending a fax.
• Own Fax Number
Specifies the fax number of the machine using up to 20 characters, including 0 to 9, space,
and "+".
• Own Name
Specifies the name of the machine using up to 20 characters.
Function Priority
Specifies the mode that is activated when the power is turned on.
Default: [Facsimile]
• Copier
• Facsimile
• Scanner
Energy Saver Mode
Sets the machine to enter Energy Saver Mode, Energy Saver Mode 1 or Energy Saver Mode 2, to
reduce power consumption. The machine recovers from Energy Saver Mode when it receives a
print job, prints a received fax, receives TWAIN scan directions from the computer, or when any
key is pressed.
Energy Saver Mode 1
The machine enters Energy Saver Mode 1 if the machine has been idle for about 30 seconds.
It takes less time to recover from Energy Saver Mode 1 than from power-off state or Energy
Saver Mode 2, but power consumption is higher in Energy Saver Mode 1 than in Energy
Saver Mode 2.
Default: [Off]
• Off
• On
Energy Saver Mode 2
The machine enters Energy Saver Mode 2 after the period of time specified for this setting has
passed. The machine consumes less power in Energy Saver Mode 2 than in Energy Saver
Mode 1, but it takes longer to recover from Energy Saver Mode 2 than from Energy Saver
Mode 1.
Default: [On] (1 minute)
• On (1 to 240 minutes, in 1 minute increments)
• Off
System Settings
113