75
Rigel-PJ1nx Training
Slide 75
Writing Data to New Boards
Data Writing After Replacing the Main Board - 9
Set the Baud rate as shown above.
The Baud rate must be the same as the Baud rate setting on the projector
(Menu button – Setup – Installation – Communication Speed).
Input the serial number and model name in the following format, using
asterisks and spaces as shown.
* modelname serialnumber*
Click ‘Write’
No verification is performed, so click ‘Read’ after writing is finished, to
make sure that the projector got the data correctly.
Input serial number and
model name here
No additional notes
