73
Rigel-PJ1nx Training
Slide 73
Writing Data to New Boards
Data Writing After Replacing the Main Board - 7
Select ‘Flash’.
Set the Port to DDCAUTO. No baud rate is selected.
Click ‘Choose’ and browse for the file.
Select the analog file: modelname_EDID_DSUB_Vxxx.bin
Put the projector in service mode.
Click ‘Flash’.
The data will be written. Click ‘OK’ when ‘Finished’ appears.
Do the same procedure for each D-SUB input (COMPUTER IN) terminal.
Turn the projector power off.
1
2
3
4
No additional notes