71
Rigel-PJ1nx Training
Slide 71
Writing Data to New Boards
Data Writing After Replacing the Main Board - 5
Select ‘Flash’.
Set up the Port and baud rate.
The Baud rate must be the same as the Baud rate setting on the projector
(Menu button – Setup – Installation – Communication Speed).
Click ‘Choose’ and browse for the file.
Select the digital file:
modelname_EDID_HDMI_Vxxx.bin
Click ‘Flash’.
The data will be written. Click ‘OK’ when ‘Finished’ appears.
Turn the projector power off.
1
2
3
4
No additional notes
