47
Rigel-PJ1nx Training
Slide 47
Replacing the OPT BASE
The service parts are all produced so that the
configuration of the LCD panels is LRL.
There is no need to worry about whether the LCD
panels are L-type or R-type when installing new
parts.
Do the following after replacing the OPT BASE:
Optical Axis Adjustments (check, and adjust only
if necessary)
Flicker adjustment
Usage Time setup
Adjustment Procedure: Service manual > 3. Replacement and Adjustment >
Replacement of Optical Parts > Optical Parts Adjustment > Adjustment of the
optical axis (Shadow adjustment)
We will look at these adjustments later.
