Ricoh PJ WX4152, Operating Instructions Manual

Page: 77 / 196

6. Enter the identification code on the QuickProjection dialog.
The projector's name or IP address can also be entered instead of the identification code.
7. Click [Projection].
The computer's screen is projected.
While the computer's screen is being projected, a small QuickProjection is displayed in the lower
right corner of the computer's screen.
To pause the projection, click .
To quit the projection, click [ ], and then click [OK].
• Two projection modes are available: “Presentation mode” that projects the screen of a single PC,
and “Discussion mode” that projects the screens of four PCs at the same time.
• For detailed QuickProjection operating methods, refer to the QuickProjection Help.
• If the display resolution of the computer screen and the projector matches, the image quality is
better. We recommend setting the resolution of the computer screen to the following:
• RICOH PJ WX4152N/WX4152NI: 1280 × 800
Projecting a Computer's Screen via a Network
75