Ricoh PJ WX4141, Operating Instructions Manual

Page: 73 / 104

Problem Solutions
The remote control does not
respond. • Make sure the ID assigned to the remote control and in
the settings of [Remote Control ID] in [Default Settings 2]
are the same. For details, see page 21 "Operating
Multiple Projectors with the Remote Control".
• Make sure the batteries in the remote control are not
dead.
• Make sure the batteries are correctly loaded into the
remote control. For details, see page 20 "Loading
Batteries into the Remote Control".
• Make sure the remote control is inside its effective range.
For details, see page 19 "Effective Range of the Remote
Control".
• Make sure there is nothing placed between the remote
control and the projector.
• Make sure the remote control receiver is not exposed to
strong light.
Display language is unknown. • Press the [Menu] button, and then select the display
language in [Language / XXX] (XXX indicates the current
display language) on the [ ] tab. For details, see
page 60 "Default Settings 2 Menu".
Accessing the Online Knowledge Base
If you have any questions about the projector, refer to the knowledge base. Visit our global website
listed below, and then access a knowledge base page in your language.
http://www.ricoh.com/support/
You can search the knowledge base by product name or keyword.
Common Problems
71