Ricoh PJ WX4141, Operating Instructions Manual

Page: 76 / 104

• Soak the tissue paper that you used in water, and then throw it away as burnable trash.
• When you carry the projector by hand, hold it with both hands and keep it in a horizontal position.
If you hold the projector with one hand, its covers may come off or you may drop it.
• If moving the projector under conditions including vibration and shock, use both the packing case
and included carrying bag. Transporting the projector using the carrying bag only may damage it
due to shock or vibration. Further, transporting the projector in a damaged packing case may
damage the projector, so use a packing case that is strong enough to protect the projector from
shock or vibration.
• Do not apply volatile substances such as insecticide to the projector. Also, do not bring the
projector into long-term contact with rubber or vinyl products. Doing so may cause discoloration or
the paint to peel.
• The projector is not intended for long-term continuous operation. Further, do not use the projector
before removing it completely from the packing case. If a malfunction occurs when using the
projector under these conditions, a fee is charged for repair even if the warranty is still in effect.
• Do not use locations that may be hot, such as near a heater. Doing so may cause the projector to
malfunction or reduce the service life.
• Avoid locations that may become smoky. Particulates may adhere to the optical parts, reducing the
service life and causing the image to darken.
• Using the projector close to a television or radio may adversely affect the images and sound.
• Do not expose the projector to salt air or corrosive gas. Also, do not place the projector in a
laboratory or other location where a chemical reaction might occur. Doing so may cause the
projector to malfunction.
• Moving the projector from a low-temperature location to a high-temperature location may cause
water droplets to form on the projector lens and parts due to condensation. Continued use under
such conditions may cause malfunction, so do not use the projector until the water droplets have
evaporated.
• The air is thin at high elevations, so the cooling efficiency of the projector is reduced. Select [On] in
[High Altitude Mode] before using.
• Do not use the projector in an extremely inclined position (±20° or greater). Doing so may cause
malfunction or reduce the service life.
• Clean the air filter regularly. If the filter becomes clogged, it may cause the inside of the projector
to overheat and reduce the service life of the optical parts.
• If the air filter is damaged, replace it with a new one. Using a damaged air filter may allow dust or
dirt to get inside the projector and cause the projector to stop working or malfunction.
6. Maintenance
74