Ricoh PJ WX4141, Operating Instructions Manual

Page: 33 / 104

• If [Auto Input Search] in [Default Settings 1] is specified as [On], pressing the [Input] button
changes the input to one that is different from the image signal being input.
• The image specified in [Background on No Signal] under [Default Settings 1] is displayed if the
signal is lost or there is no signal being input from the connected equipment. Check that the
equipment is turned on and that it is properly connected to the projector.
• If the projector does not support the input signal, a "Unsupported signal" message is displayed.
• The brightness of the image may vary temporarily because the lamp may automatically adjust to
maintain its condition.
When projecting the screen of a laptop computer
When connecting a laptop computer to the projector, switch the computer's image output.
In Windows operating systems, the image output can be switched with a function key. While pressing
and holding the [Fn] key, press the
key, the key, or the LCD/VGA function key.
Examples of various computers
Computer brand Key combination
MSI [Fn] + [F2]
Everex, MITSUBISHI, NEC, Panasonic, SOTEC [Fn] + [F3]
Gateway, HP [Fn] + [F4]
acer, SHARP, SOTEC, TOSHIBA [Fn] + [F5]
HITACHI, IBM, lenovo, SONY [Fn] + [F7]
ASUS, DELL, EPSON, HITACHI [Fn] + [F8]
FUJITSU [Fn] + [F10]
• Depending on the computer, the image may not be projected properly if it is displayed on the
computer's LCD display while being projected onto the screen by the projector. If this happens, turn
off the computer's LCD display. For details about switching the display, see the manual provided
with the computer.
Basic Operations for Using the Projector
31