• If the job is cancelled during sending, it may or may not be counted, depending on what stage of
the process had been reached when the job was cancelled.
• If several jobs are combined for sending to the Scan Router, Scan-to-Email, or Scan-to-PC, or if
one job is sent to more than one destination. each send is counted separately. For example, if the
same document is sent by Scan-to-Email as well as Scan-to-PC, then it is counted twice (once for
Scan-to-Email and once for Scan-to-PC).
8141
T:Deliv Jobs/Svr
[0 to 9999999/ 0 / 1]
These SPs count the total number of jobs scanned and sent to a Scan Router
server.
8145
S:Deliv Jobs/Svr
These SPs count the number of jobs scanned in scanner mode and sent to a Scan
Router server.
1 B/W
Monochrome
2 Color
Color
3 ACS
Automatic Color Selection
• The jobs are counted even though the arrival and reception of the jobs at the Scan Router server
cannot be confirmed.
• If even one color image is mixed with black-and-white images, then the job is counted as a "Color"
job.
• If the job is cancelled during scanning, or if the job is cancelled while the document is waiting to be
delivered, the job is not counted.
• If the job is cancelled during sending, it may or may not be counted, depending on what stage of
the process had been reached when the job was cancelled.
• Even if several files are combined for sending, the transmission counts as one job.
8151
T:Deliv Jobs/PC
[0 to 9999999/ 0 / 1]
These SPs count the total number of jobs scanned and sent to a folder on a PC
(Scan-to-PC).
8155
S:Deliv Jobs/PC
These SPs count the total number of jobs scanned and sent with Scan-to-PC.
1 B/W
Monochrome
2 Color
Color
4. Appendix: Service Program Mode Tables
292
4
Summary of Contents for OR-C1
