Ricoh OR-C1, Field Service Manual

Page: 564 / 678

3*
Function Flag
Enables or disables the remote service function.
[0 to 1 / 0 / 1 /step]
0: Disabled, 1: Enabled
NOTE: This SP setting is changed to "1" after @Remote register has been completed.
7*
SSL Disable
Uses or does not use the RCG certification by SSL when calling the RCG.
[0 to 1 / 0 / 1 /step]
0: Uses the RCG certification
1: Does no use the RCG certification
8*
RCG Connect Timeout
Specifies the connect timeout interval when calling the RCG.
[1 to 90 / 30 / 1 second /step]
9*
RCG Write Timeout
Specifies the write timeout interval when calling the RCG.
[0 to 100 / 60 / 1 second /step]
10*
RCG Read Timeout
Specifies the read timeout interval when calling the RCG.
[0 to 100 / 60 / 1 second /step]
11*
Port 80 Enable
Enables/disables access via port 80 to the SOAP method.
[0 or 1 / 0 / – ]
0: Disabled, 1: Enabled
13*
RFU (Remote Firmware Update) Timing
Selects the RFU timing.
[0 or 1 / 1 / – ]
0: RFU is executed whenever update request is received.
1: RFU is executed only when the machine is in the sleep mode.
4. Appendix: Service Program Mode Tables
206
4