Ricoh MP6200A, Manual

Page: 7 / 26

4
The MP 6200AR Series
2. System environment
This unit can be operated in the system environment explained here.
CPU 75-MHz (or faster) Pentium
Memory Windows 95: 16MB or greater.
Windows NT 4.0: 32MB or greater.
Adaptec Inc. AHA-154x, 2940, 3940,
recommended.
Hard disk with average access time of
19msec or less, and data transfer speed of
1200KB/sec or greater. 75MB or more free
space.(The free space needed for writing
depends on the quantity of data.)
Windows 95,
Windows NT 4.0 (Service Pack 2) or later
Ricoh, Kao, Mitsubishi Chemical, Taiyo Yuden,
Mitsui Toatsu, TDK or Kodak discs are rec-
ommend.
†
Occasionally the CD-R and CD-RW discs written by the CD-R/RW drive
cannot be read by other CD drives*
1
. These unreadable discs should be
read using the CD-R/RW drive.
†
As the power and interface environments on notebook PCs differ from
desktops, the CD-ROM might not be supported.
The CD-ROM drive has been confirmed to work in the following environ-
ment:
CPU: 75-MHz Pentium
OS: Windows95
Memory: 24 MB
*
1 The discs written using the CD-R/RW drive might not be readable by CD-
ROMs other than Multi-read compatible (Random UDF compatible) CD-
ROMs.
Multiread compatible (Random UDF compatible) CD-ROMs are:
#
CD-ROMs that can read low reflectance discs
#
CD-ROMs that support Packet Write.
System
requirements
SCSI
interface
Hard disk
Software
Required OS
CD-R,
CD-RW discs