20
Appendix
Cautions Concerning Disc Cleaning
•
Remove the disc by pressing the eject button.
•
Use compressed air to clear dust from the drive. (Spray the com-
pressed air for about 5 seconds). (See Fig. 1)
•
Check to see if there is dirt on the surface of the disc. Be careful not
to touch the disc with the fingers when doing this. (See Fig. 2)
•
After cleaning the disc with compressed air, place it on the disc tray
and load in the drive.
We suggest using Perfect Duster II (80z.) as compressed air for
cleaning.
Other Cautions
•
When moving the equipment, make sure that the disc has been re-
moved from the drive.
•
When connecting connectors, make sure that the power is OFF. If
the power is ON, there is a possibility of short circuit.
•
When not using the drive for a long period, dust may adhere to the
disc tray. Before using the drive again, use dry air cleaner to remove
the dust from the tray.
50-100mm
Fig. 1
Fig. 2
Fig. 3
Disc tray
50-100mm
Check
Recording surface
Summary of Contents for MP6200A
Page 5: ...2 The MP 6200AR Series...
Page 19: ...16 The MP 6200AR Series...
Page 20: ...17 Section 2 Appendix Appendix...
