Ricoh LF311 Operating Instructions Manual Download Page 123

Page: 123 / 148

Toner Cassette Storage

117

Toner Cassette Storage

WARNING:

CAUTION:

• Store in a cool, dark place.
• Never store where they may be ex-

posed to heat.

• Keep out of the reach of children.
• Do not eat toner.
• Do not lay heavy objects on toner

cassette.

• Do not incinerate toner or toner

containers. Toner dust may cause
flashback when exposed to an
open flame.

•

Do not incinerate spilled toner
or used toner. Toner dust
might ignite when exposed to
an open flame.

•

Dispose of the used toner car-
tridge in accordance with the
local regulations.

•

Keep toner (used or unused) and
toner cartridge out of the reach
of children.

StellaF15_EN_Combine_F1_Pre_FM.book Page 117 Friday, August 27, 2004 6:23 PM

Summary of Contents for LF311




















































































































































Search results

Summary of Contents for LF311

Reviews:

Related manuals for LF311

Brands by name

Popular brands

Ricoh LF311, Operating Instructions Manual

Search results

Summary of Contents for LF311

Reviews:

Related manuals for LF311

Brands by name

Popular brands