Ricoh ISC 1024c Settings Manual Download Page 67

Page: 67 / 188

Settings You Can Change with User Tools

❖

Output: Document Server (Document Server)

You can specify the tray to which documents are delivered.

Note

❒

Default:

Internal Tray 1

❒

For details about output trays, see p.54 “Output: Copier (copier)”.

❖

Output: Facsimile (facsimile)

You can specify the tray to which documents are delivered.

Note

❒

Default:

Internal Tray 2

❒

For details about output trays, see p.54 “Output: Copier (copier)”.

❖

Output: Printer (printer)

You can specify the tray to which documents are delivered.

Note

❒

Default:

Internal Tray 1

❒

The output trays set on the printer driver have priority over the output tray
specified above.

Output tray settings

Limitation

❒

You cannot interrupt the current stapling job even if a stapling job is specified
by a different function.

❒

When the 500-Sheet Finisher or 1000-Sheet finisher is installed and stapling or
shift-sorting is specified for a job, the job will be delivered to the finisher shift
tray regardless of the output tray specified.

❒

The output tray used can be changed, when a stapling job of a different func-
tion is interrupted by copying, as in the following cases:

❖

When the 500-Sheet Finisher is installed and the finisher tray is specified for the
output tray:

• The interrupting job will be delivered to Internal Tray 1.

❖

When the 1000-Sheet Finisher is installed and the finisher tray is specified for the
output tray:

• The interrupting job will be delivered to Finisher Proof Tray.

ThemisC1_AE_zentai_pre_FM.book Page 55 Thursday, July 28, 2005 2:13 PM

Summary of Contents for ISC 1024c





























































































































































































Search results

Summary of Contents for ISC 1024c

Reviews:

Related manuals for ISC 1024c

Brands by name

Popular brands

Ricoh ISC 1024c, Settings Manual

Search results

Summary of Contents for ISC 1024c

Reviews:

Related manuals for ISC 1024c

Brands by name

Popular brands