Ricoh ISC 1024c Settings Manual Download Page 125

Page: 125 / 188

Loading Paper

113

BBBB

Load paper into the tray with the
print side up.

Important

❒

Check that the top of the stack is
not higher than the limit mark
inside the tray.

CCCC

Push in the paper tray slowly un-
til it stops.

Loading Paper into Large
Capacity Tray (optional)

Note

❒

Load copy paper of the same size
and direction in both left and right
side trays.

AAAA

Pull out the LCT, slowly until it
stops.

BBBB

Align the paper and load it in the
tray with the print side up.

Important

❒

Align the paper stacks and load
them against the left and right
walls, or a paper misfeed might
occur.

❒

Do not stack paper over the lim-
it mark.

CCCC

Push the paper tray slowly in un-
til it stops.

ZGJS230E

ZGJS170E

ZGJS180E

ThemisC1_AE_zentai_pre_FM.book Page 113 Thursday, July 28, 2005 2:13 PM

Summary of Contents for ISC 1024c





























































































































































































Search results

Summary of Contents for ISC 1024c

Reviews:

Related manuals for ISC 1024c

Brands by name

Popular brands

Ricoh ISC 1024c, Settings Manual

Search results

Summary of Contents for ISC 1024c

Reviews:

Related manuals for ISC 1024c

Brands by name

Popular brands