Ricoh IM 350 Page 50 User Manual Download

Page: 50 / 312

Installing the IEEE 1284 interface board

• Before beginning work, ground yourself by touching something metal to discharge any static

electricity. Static electricity can damage the interface units.

• Do not subject the IEEE 1284 interface board to physical shocks.

Check the contents of the package.

Turn the machine off and unplug the power cord.

Loosen the two screws and remove the slot cover.

DVL370

The removed cover will not be reused.

Fully insert the IEEE 1284 interface board.

DVL373

Confirm that the IEEE 1284 interface board is firmly connected to the controller board.

Tighten the two screws to secure the interface board.

Plug in the power cord, and then turn on the machine.

Print the configuration page to confirm that the board was attached correctly.

1. Getting Started

Summary of Contents for IM 350

























































































































































































































































































































Search results

Summary of Contents for IM 350

Reviews:

Related manuals for IM 350

Brands by name

Popular brands

Ricoh IM 350, User Manual

Search results

Summary of Contents for IM 350

Reviews:

Related manuals for IM 350

Brands by name

Popular brands