Ricoh IM 350 Page 162 User Manual Download

Page: 162 / 312

Basic Procedure for Storing Scan Files

This section explains how to store the scanned documents to the machine's hard disk.

DVL860

• You can specify a password for each stored file. We recommend that you protect stored files from

unauthorized access by specifying passwords.

• Stored files will be deleted after a set period. For details about specifying the period, see

"Administrator Tools", Settings.

• Scan file stored in the machine may be lost if some kind of failure occurs. We advise against using

the hard disk to store important files. The supplier shall not be responsible for any damage that may
result from the loss of files.

Press [Home] ( ) at the bottom of the screen in the center.

Press the [Scanner (Classic)] icon.

Make sure that no previous settings remain.

If a previous setting remains, press [Reset].

Place originals.

5. Scan

160

Summary of Contents for IM 350

























































































































































































































































































































Search results

Summary of Contents for IM 350

Reviews:

Related manuals for IM 350

Brands by name

Popular brands

Ricoh IM 350, User Manual

Search results

Summary of Contents for IM 350

Reviews:

Related manuals for IM 350

Brands by name

Popular brands