Ricoh gr digital III User Manual Download Page 16

Page: 16 / 185

IRST

TIME

USER

? R

EAD

THIS

First Steps

Prepare the camera for use.

Charging the Battery

The rechargeable battery supplied with the camera is not
charged at shipment. Charge the battery in the supplied
BJ-6 battery charger before use.

Place the battery in the charger.

Place the battery label up
with the “+” and “–” labels ori-
ented to match the labels on
the charger.

Caution

Be sure the battery is in the correct
orientation.

Plug the charger in.

The charger lamp will light
while the battery charges.

An exhausted battery will re-
charge in about two hours at
25 °C.

Note

If the charger lamp blinks, a battery or charger fault may have
occurred. Unplug the charger and remove the battery.

Remove the battery.

Charging is complete when the charger lamp turns
off. Unplug the charger and remove the battery.

Summary of Contents for gr digital III


























































































































































































Search results

Summary of Contents for gr digital III

Reviews:

Related manuals for gr digital III

Brands by name

Popular brands

Ricoh gr digital III, User Manual

Search results

Summary of Contents for gr digital III

Reviews:

Related manuals for gr digital III

Brands by name

Popular brands