Ricoh gr digital III User Manual Download Page 30

Page: 30 / 185

IRST

TIME

USER

? R

EAD

THIS

Flash Photography

The flash only fires when raised. Slide the

OPEN

switch

to raise the flash and press the

button to choose from

the following flash modes:

Mode

Description

Flash Off

The flash is off and will not fire.

Auto

The flash fires automatically when required.

Red-Eye
Flash

Reduces “red-eye” in portraits taken with the flash.

Flash On

The flash fires with every shot.

Flash
Synchro.

Combines the flash with slow shutter speeds. Use when
taking portraits that include details of the background
indoors or at night. Use of a tripod is recommended to
prevent blur.

Manual
Flash

The flash fires with every shot; flash output is fixed at the
level selected for

Manual Flash Amount

(page 73).

Note

The flash has a range of approximately 20 cm to 3.0 m (8 in.–10 ft.),
measured from the front of the lens (auto ISO; see page 84).

Using the Built-in Flash

Raise the flash.

Slide the flash

OPEN

switch as

shown.

Summary of Contents for gr digital III


























































































































































































Search results

Summary of Contents for gr digital III

Reviews:

Related manuals for gr digital III

Brands by name

Popular brands

Ricoh gr digital III, User Manual

Search results

Summary of Contents for gr digital III

Reviews:

Related manuals for gr digital III

Brands by name

Popular brands