Ricoh gr digital III User Manual Download Page 157

Page: 157 / 185

151

ECHNIC

Camera-Related Problems

Power Supply

Problem

Cause

Solution

Page

The camera does
not turn on.

Battery is exhausted or not in-
serted.

Check that battery is correctly in-
serted. Charge battery (recharge-
able battery only), insert fresh
battery, or use AC adapter.

10,
12,

165

Battery is incompatible.

Use supplied battery or compat-
ible AAA batteries.

AC adapter is not connected.

Check connection.

165

Battery is not in correct orienta-
tion.

Insert battery in correct orienta-
tion.

The camera turns
off during use.

Camera has turned off automati-
cally to save power.

Turn camera on.

Battery is exhausted.

Charge battery (rechargeable bat-
tery only), insert fresh battery, or
use AC adapter.

10,
12,

165

Battery is incompatible.

Use supplied battery or compat-
ible AAA batteries.

The camera does
not turn off.

Camera malfunction.

Remove and reinsert battery or
disconnect and reconnect AC
adapter.

12,

165

Low battery
indicator displayed
or camera turns off
when battery has
charge remaining.

Battery is incompatible.

Use supplied battery or compat-
ible AAA batteries.

Battery can not be
charged.

Battery has reached end of charg-
ing life.

Replace with a new battery.

Battery is quickly
exhausted.

Ambient temperature is very high
or very low.

—

Poor lighting requires extensive
use of flash.

—

Summary of Contents for gr digital III


























































































































































































Search results

Summary of Contents for gr digital III

Reviews:

Related manuals for gr digital III

Brands by name

Popular brands

Ricoh gr digital III, User Manual

Search results

Summary of Contents for gr digital III

Reviews:

Related manuals for gr digital III

Brands by name

Popular brands