Ricoh gr digital III User Manual Download Page 41

Page: 41 / 185

IRST

TIME

USER

? R

EAD

THIS

Tip: Selecting Ranges

To select one or more ranges consisting of two images and all
photographs between them, press the

ADJ.

lever in and follow

the steps below:

3.1

Press

, or

to high-

light the first image and press

to select. The se-

lected image is marked with
a

icon. If you selected the

wrong image, press

DISP.

and

try again.

3.2

Press

, or

to high-

light the last image and press

to select. The se-

lected image and other images
in the selected range will be
marked with

icons.

Repeat Steps 3.1–3.2 to select additional ranges, or press the

ADJ.

lever in to return to Step 3 and select or deselect indi-

vidual photographs.

Press

A confirmation dialog will be
displayed.

Select

Yes

Press

to highlight

Yes

and press

Summary of Contents for gr digital III


























































































































































































Search results

Summary of Contents for gr digital III

Reviews:

Related manuals for gr digital III

Brands by name

Popular brands

Ricoh gr digital III, User Manual

Search results

Summary of Contents for gr digital III

Reviews:

Related manuals for gr digital III

Brands by name

Popular brands