Ricoh GR Digital II Operating Manual Download Page 57

Page: 57 / 186

Various S

hooting F

unc
tions

Crop -----------------------------------------------------------------------------------------------------------

• If [Crop] of the [Shooting] menu is set to [35 mm] or

[47 mm], the 35 mm equivalent angle of view is changed
from default 28 mm to 35 mm or 47 mm, and the image
display is also changed.

• When [Crop] is set, available format and size are limited.

Crop

Format/Size limitation

35 mm

cannot be used.

47 mm

and

cannot be used.

• If [28/35 mm] or [28/35/47 mm] is set to the Fn1, Fn2, and Effect buttons in the [Key Custom Options]

menu, the angles of view can be switched with button operation only. (p.122)

Summary of Contents for GR Digital II



























































































































































































Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands

Ricoh GR Digital II, Operating Manual

Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands