Ricoh GR Digital II Operating Manual Download Page 67

Page: 67 / 186

Various S

hooting F

unc
tions

Caution -------------------------------------------------------------------------------------------------------

• [FA/Move Target] cannot be set in the following cases.

• In

and

modes

• When the focus is set to [Subj. Tracking]

• When [Magnification Setting] is set to [Magnify whole], [One Press M Mode] is not available.

Note -----------------------------------------------------------------------------------------------------------

• If [Focus] is changed to [Subj. Tracking], the target position is reset.
• In the [Key Custom Options] menu, [FA/Move Target] can be registered to use to the Fn1, Fn2, and

Effect buttons. (p.122)
[FA/Move Target] is registered to the Fn1 button as the default setting.

Summary of Contents for GR Digital II



























































































































































































Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands

Ricoh GR Digital II, Operating Manual

Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands