Ricoh GR Digital II Operating Manual Download Page 19

Page: 19 / 186

Bef

e Y

ou
Beg

Up-down Dial and ADJ. Lever

Use the up-down dial and ADJ. lever in

place of the

!"#$

buttons and to

set the exposure. (p.43)

Operation

Description

Up-down dial

Turn left or right

Used in place of the

buttons.

Changes the aperture value and shutter speed.

ADJ. lever

Press left or right

Used in place of the

buttons.

Changes the aperture value, shutter speed, and ISO sen-
sitivity.

Push in the middle

Calls assigned function. (p.121)

Note -----------------------------------------------------------------------------------------------------------

• You can switch the functions of the up-down dial and ADJ. lever. (p.44)

ADJ. lever

Up-down dial

Summary of Contents for GR Digital II



























































































































































































Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands

Ricoh GR Digital II, Operating Manual

Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands