Ricoh GR Digital II Operating Manual Download Page 161

Page: 161 / 186

ppendic

159

Playback/Deletion

Problem

Cause

Solution

Page

Shooting information is not

displayed.

Information is hidden.

Press the DISP. button to display the

information.

p.22

The images cannot be played

back, or the images are not

displayed on the picture

display.

AV or HDMI cable is incorrectly

connected.

Reconnect the cable.

p.110

The [Video Out Mode] setting is

incorrect.

Select another video mode.

p.111

The images on the memory

card cannot be played back, or

the images are not displayed

on the picture display.

The card was not formatted in this camera. Insert a card that has been formatted in

this camera and contains images saved

with this camera.

—

The memory card contains images that

were not saved normally.

Insert a card with images that were

saved normally.

—

Memory card contacts are dirty.

Clean with soft, dry cloth.

—

The card is malfunctioning.

Insert another card. If there is no prob-

lem at this time, the camera is okay.

There may be something wrong with

the card, so do not use it.

—

The picture display turned off. The battery is exhausted.

Charge the battery.

p.25

The camera has turned off automatically

to save power.

Turn the camera back on.

p.27

The file cannot be deleted.

The file is protected.

Remove protection.

p.99

The memory card is locked.

Unlock the card.

—

The memory card cannot be

formatted.

The memory card is locked.

Unlock the card.

—

Summary of Contents for GR Digital II



























































































































































































Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands

Ricoh GR Digital II, Operating Manual

Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands