Ricoh G800 User Manual Download Page 114

Page: 114 / 222

113

amer

a Memo Men

10 Camera Memo Menu

Using the Menu

Press the MENU/OK button.

• The shooting menu (or the playback menu) appears.

Press

to highlight the tab for the current menu.

Press

to display the camera

memo menu.

Press

to place the cursor in the camera memo menu.

Press the

buttons to select the

desired item.

• If the DISP. button is pressed at this

point, the display returns to the screen
shown in Step 3.

• Press the

button at the bottom item

to display the next screen.

Press the

button.

• The menu item settings are displayed.

Press the

buttons to select the

setting.

Press MENU/OK, or press

and

then MENU/OK.

• The camera memo menu will close and

the camera will return to shooting or
playback.

• Pressing the

button in Step 8 confirms the setting and the display

returns to the screen shown in Step 5.

Summary of Contents for G800































































































































































































































Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands

Ricoh G800, User Manual

Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands