Ricoh G800 User Manual Download Page 182

Page: 182 / 222

181

op
ying Pic

tur
es t
o a C

omput

er via USB

Mac OS

Follow the steps below to copy pictures to your computer.

Caution ---------------------------------------------------------------------------------

If you intend to copy pictures from a memory card, insert the card before
connecting the camera.

Select [Mass Storage] for [USB Connection].

• In the setup menu, select [USB Connection] (

P.102), then highlight

[Mass Storage] and press MENU/OK.

Turn the camera off.

Connect the supplied USB cable to the computer.

Connect the cable to the camera.

• The camera will turn on automatically.

Copy photos to the computer.

• Copy files from the camera to the

desired location.

• If a memory card is inserted, the

computer will list the files on the
card. Otherwise, the computer will
list the files in internal memory.

Disconnect the USB cable when transfer is complete.

• Drag the camera volume into the Trash and then disconnect the USB

cable.

Summary of Contents for G800































































































































































































































Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands

Ricoh G800, User Manual

Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands