Ricoh G800 User Manual Download Page 153

Page: 153 / 222

152

eless Net

orks (

G800SE Only)

Viewing and Editing the Communicatio

n List

The camera can be used to view and edit the communication list.

Select [Send To].

• After turning the camera on, highlight

[Send To] in the expanded settings
menu (

P.118) and press

to display

the communication list.

View settings.

• Press

to highlight items and press

to view. Press DISP. to

return to the previous display.

Edit settings.

• Highlight an entry in the settings list and press

. Edit the setting

using the on-screen keyboard (

P.108) and press MENU/OK to save

changes and return to the settings list. Repeat Steps 2–3 to select
and edit additional settings.

Return to the expanded settings menu.

• Press MENU/OK to return to the expanded settings menu.

Caution ---------------------------------------------------------------------------------

Check the [Network Key] after editing [Crypt/Authentication] (

P.142).

Summary of Contents for G800































































































































































































































Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands

Ricoh G800, User Manual

Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands