Ricoh G800 User Manual Download Page 17

Page: 17 / 222

If y

ou ar

e using the c

amer

a for the first time

, r

ead this sec

tion.

Packing List

Open the package and make sure all the items are included.

* The actual appearance of items included may differ.

• The Camera

The serial number of the camera
is provided on the bottom face of
the camera.

• Rechargeable Battery

• Battery Charger

• USB Cable (Micro B Cable)
• Camera User Guide

• Warranty
• Neck Strap

Optional Accessories

•  Rechargeable Battery (DB-65)
•  Battery Charger (BJ-6)
•  HDMI Cable (HC-1)

• Soft Case (SC-700)

Used to store your camera.

• Wide Conversion Lens (DW-5)

Note

-------------------------------------------------------------------------------------

Attaching the Neck Strap to the Camera

Thread the small end of
the strap through the strap
eyelet on the camera and
loop the ends as shown.

Summary of Contents for G800































































































































































































































Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands

Ricoh G800, User Manual

Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands