Ricoh G800 User Manual Download Page 204

Page: 204 / 222

203

ppendic

Using an Optional Wide Conversion Lens

A wide conversion lens (DW-5) enables
shooting at a lens magnification of
0.8 times (equivalent to a 35 mm
camera’s 22 mm zoom in wide-angle).

Caution ---------------------------------------------------------------------------------

• When the wide conversion lens is attached, set the zoom position to the wide-

angle end.

• When the wide conversion lens is attached, even if you use the internal or

external flash, the area around the subject is not illuminated sufficiently so the
picture will be partly underexposed.

Note

-------------------------------------------------------------------------------------

For cleaning and storage, see the documentation that came with your wide
conversion lens.

Optional Filters

Commercially-available filters with a
diameter of 37 mm can be mounted on
the lens to protect it from damage and
condensation.

Summary of Contents for G800































































































































































































































Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands

Ricoh G800, User Manual

Search results

Summary of Contents for G800

Reviews:

Related manuals for G800

Brands by name

Popular brands