Ricoh FT5035, User Manual

Page: 153 / 179

Special paper size set
If you would like to use following paper sizes in the 1st tray, contact your
service representative.
200 x 148 mm
:
, 297 x 432 mm
;
, 210 x 340 mm
;
, 210 x 182 mm
:
, 210
x 170 mm
:
, 8
1/2
" x 14"
;
, 5
1/2
" x 8
1/2
"
:
, 11" x 15"
;
, 10" x 14"
;
, 8" x
10
1/2
"
;
, 8" x 10"
;
, 267 x 390 mm
;
, 195 x 267 mm
:;
, 8" x 13"
;
, 8
1/4
" x
13"
;
A3 double count
When you use A3 paper with user codes, your service representative can
set the copier to count each A3 sheet as two copies.
Back side margin
With the default setting, a 5 mm margin is made on the right of the reverse
side of copies when making two-sided copies from one-sided originals. Your
service representative can cancel this setting.
❐ If you use the Margin Adjustment function, this setting does not come in effect.
Auto off mode
With this function, all input modes are reset and the fusing unit is turned off.
Your service representative can set the copier to turn Auto off mode on
automatically.
User code mode
Your service representative can set the copier for user code. If the copier is
set for user code, operators must input a user code before the copier will
operate. The copier keeps a count of the number of copies made under
each user code. Also, your service representative can check how many user
codes are stored in the copier.
❐
For setting user codes and other functions relating to them,
☛
see page 142.
E-EU-7
SERVICE REPRESENTATIVE SETTING
150