Ricoh DDP70E-92, User Manual, Page: 97 / 150

Troubleshooting 5-9
Enter new password again
Passwords are for use by System
Administrators and Service
Technicians only.
Contact your System Administrator for
additional information.
Enter service password
You must provide the service
password to gain access to the
selected menu item. Contact your System Administrator if
you need access to menu items that
are password protected.
Enter system password
You must supply the system password
to gain access to the selected menu
item. Contact your System Administrator if
you need access to menu items that
are password protected.
Finisher Front Cover Open
Close Cover
E03F
The front cover of the finisher is open. Close the cover.
Front Cover Open
Close Cover
E043
Self-explanatory. Close the cover.
Fuser Unit End of Life
Replace Fuser Unit
E015
The fuser unit needs to be replaced.
Contact your authorized Service
Technician.
Fuser Web End of Life
Replace Fuser Web
E014
The fuser cleaning web needs to be
replaced.
Replace the Fuser Cleaning Web.
Printing will resume when the Fuser
Cleaning Web is replaced.
HCF Open
Close Tray
E023
The door of the high capacity feeder is
open.
Close the door.
HCF Top Cover Open
Close Cover
E046
Self-explanatory. Close the cover.
Heater Off Mode Status message None
Input Keycode
A valid keycode is required to activate
this feature. Contact your System Administrator or
authorized Service Technician.
Input Station Cover Open
Close Cover
E044
The IS cover is also referred to as the
vertical path cover .
Close the cover.
Insufficient Disk Space
One Copy Job
There is not enough space for the
requested operation. Only one copy is
printed.
Increase disk space or send job
multiple times.
Invalid Password
A valid password is required to access
this area of the OCP. Retry password. If incorrect, contact
your System Administrator.
Invalid Time Server
Address Incorrect value in time server IP
address field. Check the time server IP address via
the Web Utilities.
Invalid Value Incorrect value entered. Re-enter value.
LED Eraser Not Set
Set Erase Lamp
E080
The LED eraser is not set.
Contact your authorized Service
Technician.
Lifting Tray Name
The specified tray is moving into the
feed position. Status message. Wait for the printer to
return to a Ready state.
Loading Fail Network Status message.
Wait for the printer to return to a Ready
state.
Loading Network Status message.
Wait for the printer to return to a Ready
state.
Low on Front Staples Status message. Have replacement staples available.
Low on Rear Staples Status message. Have replacement staples available.
Low Toner - Recovery
E09A
In process of supplying the toner.
Wait for the printer to return to a Ready
state.
Message Description Corrective Action