Ricoh DDP70E-92, User Manual, Page: 44 / 150

3-8 Paper Handling
4. Place the paper into the tray.
5.
Close the tray.
6. If you set the sensor plate to triangle in Step 3, select the paper size from the OCP
by making the following selections:
Printer / Paper Source / Paper Size / tray # / paper size
7. Adjust the paper weight. The default paper weight is 20 lb. bond. If necessary,
change the paper weight by making the following selections:
Printer / Paper Source / / Paper Weight / tray #
8.
Select Index, Bond, or g/m
2
, then use the keypad to input the weight and press .
NOTE
:
The paper should be loaded no higher than the Max. level indicator. The
Max. level indicator is located inside the tray.