Troubleshooting
5-5
M M
L
0 0
5.1.6. Paper damage
5.2. Error Code Indication
Note:
SNS in the Circuit Diagram means Sensor.
SD in the Circuit Diagram means Solenoid.
PRIMARY FACTOR;
The center of the front side of paper is damaged on Offset mode.
PHENOMENON
CAUSES & CHECK POINTS
CORRECTIONS
Maintenance
Ref + Page
1.
This phenomenon
occurs.
1.
Shift Unit operation is
faulty.
Adjust: Shift position
Detail
Error
Code
Display Message
Error Name
Description
Page
No.
0000
NORMAL
E009
PAPER FULL
SHIFT TRAY
Shift Tray Full 1
Shift Tray is full of paper.
E00A
PAPER FULL
SHIFT TRAY
Shift Tray Full 2
Paper on the Shift Tray is abnormal.
E019
LOW STAPLE (R)
RENEW CARTRIDGE
Low Staple (R)
Detected no needle of stapler. (Rear)
E01A
LOW STAPLE (F)
RENEW CARTRIDGE
Low Staple (F)
Detected no needle of stapler. (Front)
E03F
COVER OPEN
FNS FRONT COVER
Finisher Front Cover Open
The Finisher Front cover is open.
E064
REMOVE PAPER
FINISHER
Paper On Paper Path 14
(FIN Entrance Sensor)
Paper is detected on the FIN
Entrance Sensor.
E065
REMOVE PAPER
FINISHER
Paper On Paper Path 15
(Paper Exit 1 or 2 Sensor)
Paper is detected on the Paper Exit 1
Sensor or the Paper Exit 2 Sensor.
E066
REMOVE PAPER
FINISHER
Paper On Paper Path 16
(Stacker Conveyance Sensor)
Paper is detected on the Stacker
Conveyance Sensor.
E067
REMOVE PAPER
FINISHER
Paper On Paper Path 17
(Stacker Paper Sensor)
Paper is detected on the Stacker
Paper Sensor.
E068
REMOVE PAPER
FINISHER
Paper On Paper Path 18
(Sub-Tray Exit Sensor)
Paper is detected on the Sub-Tray
Exit Sensor.
E1D0
PAPER JAM
FINISHER
FNS 1 Lead jam 1
Paper did not arrive at FIN Entrance
Sensor.
E1D1
PAPER JAM
FINISHER
FNS 1 Lead jam 2
Paper did not arrive at Paper Exit 2
Sensor.
E1D2
PAPER JAM
FINISHER
FNS 1 Lead jam 3
Paper did not arrive at Stacker
Conveyance Sensor.
E1D3
PAPER JAM
FINISHER
FNS 1 Lead jam 4
Paper did not arrive at Paper Exit 1
Sensor.
E1D5
PAPER JAM
FINISHER
FNS 1 Trail jam 2
Paper did not depart from Paper Exit
2 Sensor.
E1D6
PAPER JAM
FINISHER
FNS 1 Trail jam 3
Paper did not depart from Stacker
Conveyance Sensor.
Summary of Contents for DDP70
