Ricoh Da-P1, Field Service Manual

Page: 187 / 452

SC No. Level Error Name/Error Condition/Major Cause/Solution
SC559-00 A
Fusing jam detected 3 times in succession
Fusing jam is detected three times in succession.
Paper is wrapped around the fusing roller.
Clear the SP: fusing SC.
SC600 (Device Communication)
SC No. Level Error Name/Error Condition/Major Cause/Solution
SC636-01 D
IC Card Error (Expanded authentication module error)
Issued when expanded authentication management is set to "ON" but
either of the following occur.
• There is no expanded authentication module in the machine.
• The SD card or the file of the expanded authentication module is
broken.
• There is no DESS module in the machine.
• There is no DESS module in the machine (models on which the
function is optional).
• There is no expanded authentication module in the machine.
• The SD card or the file of the expanded authentication module is
broken.
• Set a working SD card/expanded authentication module file.
• Install the DESS module.
• In the SSP mode set SP5-401-160 to 0.
• In the SSP mode, set SP5-401-161 to 0.
• Replace the NVRAM.
Service Call
185