Ricoh Da-P1, Field Service Manual

Page: 447 / 452

bit 4 Add "Apply Auto Paper Select" is the condition that
decides if the device's paper size or paper type
should be overwritten.
Disabled Enabled
If this BitSwitch is set to "1" (enabled), the "Apply Auto Paper Select" setting will
decide if the paper size or paper type that is specified in the device settings should
be overwritten by the job's commands when "Tray Setting Priority" is set to "Driver/
Command" or "Any Type".
- Apply Auto Paper Select = OFF: Overwritten (priority is given to the job’s
commands)
- Apply Auto Paper Select = ON: Not overwritten (priority is given to the device
settings)
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
1001 [Bit Switch]
012 Bit Switch C Settings 0 1
bit 0 DFU - -
bit 1 DFU - -
bit 2 DFU - -
bit 3 DFU - -
bit 4 DFU - -
bit 5 DFU - -
bit 6 DFU - -
bit 7 DFU - -
1003 [Clear Setting]
1-003-001
Initialize Printer System *CTL
[- / - / -]
[Execute]
Initializes settings in the "System" menu of the user mode.
Printer Service Mode
147