Ricoh Da-P1, Field Service Manual

Page: 318 / 452

1135
[Inrush Control]
Enables or disables the setting of Inrush control (0: Disabled, 1: Enabled)
1-135-001 Inrush control ENG* [0 or 1 / 0 / 1/step]
1152
[NipWidthMeasuring]
Checks the fusing nip band.
1-152-001 0:OFF 1:ON ENG [0 or 1 / 0 / 1/step]
1159
[FusingJamDetect]
Disables or enables the consecutive jam error for the fusing unit.
When set to "1" (on) this SC code is issued after the 3rd consecutive jam in the fusing
unit.
1-152-001 SCdisplay ENG*
[0 or 1 / 0 / 1/step]
0: Not detects SC
1: Detects SC
1801
[Motor Speed Adj]
Adjusts the speed of the motor. The motor speed can be adjusted to correct images
that appear scratchy or of uneven density. This can occur when:
• Copying originals with large quantities of black.
• Copying originals with a large quantity of black near the trailing edge.
• Printing multiple copies of positive/negative (reverse) images.
1-801-001 MainMotor:High ENG*
[-4.0 to 4.0 / 0 / 0.01%/step] 1-801-002 MainMotor:Mid ENG*
1-801-003 MainMotor:Low ENG*
1-801-011 Exit Reverse ENG* [-4.0 to 4.0 / 0.0 / 0.1%/step]
1-801-012 Exit Reverse Mid ENG* [-9.0 to 9.0 / 0 / 0.1%/step]
Makes it faster (+) or slower (-) than the
default.
1-801-013 Exit Reverse Low ENG*
3. Appendices: SP Mode Tables
18