Ricoh Da-P1, Field Service Manual

Page: 440 / 452

005 bit 3 [PS] PS Criteria Pattern3:
The larger
the pattern
number, the
greater the
number of
criterion
used.
Pattern1: A
small number
of PS tags and
headers
Change the number of PS criterion used by the PS interpereter to determine whether
a job is PS data or not.
bit 4
Increase max number of the stored jobs.
Disabled
(100)
Enabled (750)
Changes the maximum number of jobs that can be stored on the HDD. The default
(disabled) is 100. If this is enabled, the max. will be raised to 750.
bit 5 DFU - -
bit 6 Method for determining the image rotation for the
edge to bind on.
Disabled Enabled
If enabled, the image rotation will be performed as they were in the specifications of
older models for the binding of pages of mixed orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
bit 7
Letterhead mode printing Disabled
Enabled
(Duplex)
Routes all pages through the duplex unit.
If this is disabled, simplex pages or the last page of an odd-paged duplex job, are
not routed through the duplex unit. This could result in problems with letterhead/pre-
printed pages.
Only affects pages specified as Letterhead paper.
1001 [Bit Switch]
3. Appendices: SP Mode Tables
140