Home
/
Ricoh
/
CL3500N - Aficio Color Laser Printer
/
Software Manual

Ricoh CL3500N - Aficio Color Laser Printer, Software Manual, Page: 63 / 301

Share

Page: 63 / 301

Ricoh CL3500N - Aficio Color Laser Printer Software Manual Download Page 63

Preparing for Printing

63

Installing the Printer Driver Using IEEE 1394
(SCSI print)

The printer drivers can be installed from the CD-ROM provided with this printer.

❒

Quit all applications currently running, and do not print during installation.

❒

Do not connect IEEE 1394 or USB devices to the computer or turn on another
printers during installation.

❒

Before uninstalling the printer driver, check that the IEEE 1394 interface cable
is disconnected from the computer.

❒

SCSI print must be set to “active” from the control panel. For details, see

p.145 “Host Interface Menu”

.

❒

This printer can receive print data from one computer at a time only. An mes-
sage may appear if jobs from different computers collide.

❒

If jobs collide, the first received is printed first.

❒

When the printer driver is properly installed, connecting or disconnecting the
optional IEEE 1394 cable causes the printer icon to change.

Windows 2000

❒

If

[

Found New Hardware Wizard

]

appears every time the computer is started or

the cable is connected, disable the device. To install another printer driver af-
ter setting the “1394_00n” port, click [1394_00] as a port during the printer
driver installation.

❒

Installing this printer driver requires Administrators permission. Log on using
an account that has Administrators permission.

❒

The optional 1394 interface unit can be used only with Service Pack 1 (SP1)
or higher.

A

Connect the printer and computer using the IEEE 1394 interface cable.

B

Click [

Next

] in the [

Found New Hardware Wizard

] dialog box.

C

When the message “This wizard will complete the installation for this
Device: Unknown” appears, click [

Specify a location

], and then click [

Next

>

].

D

When the message “Locate Driver Files” appears, select the [

Optional

search locations

] check box, and then click [

Specify a location

], and then click

[

Next>

].

«
...
61
62
63
64
65
...
»

Summary of Contents for CL3500N - Aficio Color Laser Printer














































































































































































































































































































Reviews:

No comments